Tube chair made from reclaimed scaffolding pipes, construction drawings.

Tube chair with a frame made from scaffold tubes – adjustable inclination for the backrest.

Construction drawings to make a tube chair from scaffolding pipes.

Exploded view construction drawing for a tube chair.

Chairs for inside or to use in the garden.
Weatherproof furniture, made with materials from reclaimed scaffolding.
Steel tubes and pipe clamps in combination with thick wood from the same scaffold.
You can repurpose the tube chair parts if you are not happy with the result.
Simply dismantle and recycle them in another furniture project.

About the scaffolding wood.
This wood has been outside for several years.
Therefore it has a weathered look and feel to it.
This wood is lightly preserved and could even be used without any woodstain.
Nevertheless we advise to spend some time on a nice finish.
Choose nice looking planks, and sand them as smooth as possible before you aooly a woodstain to the planks.

How to make a chair with scaffold pipes and planks as base construction materials.

Step by step assembly method for a tube chair from scaffolding.

Firstly cut all the tubes and planks to the right size.

Wood.

2x610mm.
2x460mm.

Tubes.
2 x 660 mm.
2x 515mm.
2x 420
2×365
2×350
4×700

Tube chair parts list.

Slide the adjustable corner joints around the rear legs.
Push the tubes as far as possible in the clamps.
Tighten the screws with an allen key.
Slide a combination clamp around each chair leg.
Attach at a height of 45 centimeters.
Important >> These must be fitted in exactly yhe same angle on each leg.
Mount the four tubes which make a frame for the chair seat.
Stick the vertical tubes for the backrest in the adjustable corner joints from step 1.
Decide what will the angle for your backrest.
Now tighten the bolts and screws firmly.
Attach the eyelets of the hinges to the vertical backrest tubes.
Then fit the armrests to the fron tegs of the chair.
At the end of these tubes comes the finger part for the hinge.
Connect the hinges with the corresponding botls and nut.
Place the T-clamps on the vertical tubes from the backrest
Slide the top tube through thos T joints and tighten the bolts.
Attach wood to the frame to make a seat and backrest.
This attachment is easily done with clamps around the tubes.
These tube clamps for wood will be fastened with only one self tapping screw per clap and plank.
Push the plastic ends in the tubes to prevent scratching the floor.

Left side construction parts for a scaffold pipe recliner chair.

Right hand side of a chair from scaffold pipes.

Chair with industrial design, made from repurposed scaffold tubes and planks.

Tarnished wood looks nice on these tube chairs.

This is a translation from our Dutch construction drawings for furniture.

More furniture that you can make with scaffolding pipes and old wood.

Vestibule for in an hallway, solid coathanger and shelf for hats.

Book shelves and storage for books.

Cupboard construction drawing for steel tubes and scaffolding planks.

Coat hanger and shelf with small cupboard made from old scaffolding.

Easy design for a pergola from tubes, do it yourself example to make a sun shade.

Warehouse storage rack or industrial design wall cabinet for in the house.

Exploded view construction drawing for a TV table.

Storage unit and side table - make this kitchen table with scaffolding pipes and reclaimed planks.

Assembly drawing for a single bed from scaffolding tubes and tube connections.

Complete wardrobe made from scaffold tubes.

Fixate to the floor or roll it on wheels.

Attach the wardrobe rack to the floor or fit strong wheels under the rack.

Assembly of all parts for a wardrobe interior or clothes rack.

For suspension of curtains from the ceiling or wall with a seperation gap.

If you hang the rail from a ceiling there will be a need for extremely good holding plugs.

This rail goes from wall to wall.

This model is almost identical to the Ikea loft bed.

Recycle art, table from street sign and scaffold tubing.

Extra strong design for a tube table made from scaffolding.

How to make a table from reclaimed scaffolding tubes and old wood.

Assembly of barstool and table from recycled scaffolds.

All the tubing and connectors with scaffolding planks needed to construct these benches. for assembly of the tube bench.

Tags: Construction drawingsHomemade chairsScaffold tube furnitureScaffolding wood

Construction drawings to make a tube chair from scaffolding pipes.

Step by step assembly method for a tube chair from scaffolding.

More furniture that you can make with scaffolding pipes and old wood.

Cookies